How to Install Shower Hand Installation Precautions

Now people's life is getting faster and faster, and a comfortable shower can properly relieve fatigue. Comfortable showers are indispensable for showers. Of course, the installation height of showers is also a big factor. Then, we will explain how to install the shower and shower installation.

How to install the shower

1, see the shower installation instructions;

2, measuring the size of the upper and lower, find the best location to install the shower;

3, according to the specific height, draw a shower on the wall need to install the location, height and so on;

4. According to the position just made, make a hole in the wall;

5. Tighten the round bottom cover of the fitting to the wall with a screw, which may cause the shower to fall off in the future.

6. Install the shower rod on the wall, stabilize the upper fixed point first, and then fix the lower position;

7. After confirming that all the screws on the inner attachment angle of the fixed point are screwed in, perform detailed adjustments;

8. Tighten the shower hose and install the hand shower.

Shower installation notes

1, determine the shower installation height

The showers are mainly divided into concealed showers and surface mounted showers. The installation depth of the concealed shower head is 2.1 m from the ground at the center of the buried water outlet of the wall, and 1.1 m from the ground at the center of the shower switch; the surface shower shower is generally defined by the shower water outlet and the shower installation height. The best distance to the ground is 2 meters. The actual installation depends on the adjustment of the height of the family.

2, protect the faucet and other hardware

When tightening the faucet, careful people will use thicker cloth or plastic film to wrap around the screw cap of the faucet to prevent the faucet from being scrambled by the wrench.

3, pay attention to the internal structure of the wall

The position of the waterway and the circuit should be marked on the wall to avoid breaking the pipe when drilling.

4, determine the pitch and height of hot and cold water

The center of hot and cold water in the shower faucet on the general market is 15 centimeters in diameter, and there are two S connectors inside. The distance can be adjusted properly. The error cannot exceed 1 centimeter.

5, pay attention to the installation is cleared

During the installation process, some dusty dust will inevitably be generated. It should be cleaned up after all the installation work has been completed. In particular, there are many impurities in the newly renovated pipeline. Cleaning the pipeline will not affect the effluent effect. Keep the scene clean and rinse it with water.