In the bathroom, the faucet is also very important, so we can not ignore the maintenance work of Hot And Cold Faucets.
1. Every month or so, wipe the faucet with car wax, which can seal the small holes on the surface of the electroplating layer to prevent moisture or corrosive gases from running in.
2. You can use a softer cloth to apply a little toothpaste to clean the surface of the faucet, then rinse it off with Pull-down Faucets water. However, do not wipe with alkaline cleaners or steel balls to avoid damage to the electroplating surface.
3. In the process of using a single-handle faucet, do not open and close too quickly; in addition, do not close the double-handle faucet too tightly, otherwise the water stopper will fall off, resulting in continuous water flow and the switch cannot be turned off.
4. The foaming device located at the outlet of Pullout Faucets, often due to water quality problems, the water volume is small or unstable, this may be because the foamer is blocked by debris, you can unscrew the foamer and use clean water or needles to remove sundries.
5. Regularly check the upper and lower water hoses. Once cracks are found, replace them immediately, so as to ensure that the service life of the faucet is not affected.
In fact, after a period of use, we should check and clean the faucet to avoid inconvenience caused by damage.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
We will contact you immediately
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
