What should I pay attention to when installing basin faucet?

Today, the editor of Jianfa will tell you about the precautions for the installation of Bathroom Faucets.First check whether all the accessories are complete, then clean the water inlet pipe of the Square Bathroom Taps to ensure that there are no impurities in the pipe; then insert a water inlet pipe into the rubber ring and tighten it, and connect the two water inlet hoses to the threaded joints respectively; Insert the two hoses into the white rubber pad at the same time, and then cover the nut to fix the faucet; then lock the two water inlet pipes and the Angle Valve interface respectively. Do not twist with a pipe wrench to prevent deformation or even breakage.

basin faucet

1. When the drain plug is connected with the washbasin, the overflow hole of the drain plug should be aligned with the overflow hole of the washbasin as much as possible to ensure that the overflow part is unobstructed. After inlaying, the upper end of the drain plug should be lower than the bottom of the washbasin.

2. The bracket fixing bolts can be made of galvanized open-foot bolts or galvanized metal expansion bolts of not less than 6mm. If the wall is a porous brick, expansion bolts are strictly prohibited.

3. The washbasin and drain pipe should be firmly connected and easy to disassemble. Connections must not be exposed. The contact between the washbasin and the wall should be caulked with silicone paste. The above is what I want to talk about today, I hope it can help you.